|Touch screen tensile machine, touch screen universal material tensile testing machine|
Microcomputer type universal material tensile testing machine is a new type of material testing machine combining electronic technology and mechanical transmission. It has a wide and accurate loading speed and force measurement range, and has high accuracy and sensitivity for the measurement and control of loads and displacements. The structure is simple and the operation is convenient. It can be directly placed on the studio floor for testing. It is especially suitable for testing instruments used to control product quality on the production line. This series of models are mainly suitable for testing non-metal and metallic materials with a test load below 5T.
The main function:
This machine is suitable for all kinds of textiles, rubber, plastics, synthetic leather, tapes, adhesive products, plastic films, composite materials, electronics, metals and other industries to do stretching, compression, bending, shearing, peeling, tearing Various tests such as cracking, two-point extension (requires additional extensometer), etc., are used to judge the quality of the product.
1. The appearance is made of aluminum alloy profile, which is simple and generous, multifunctional in drawing and pressing, and economical and practical
2.Touch screen curve display; tensile, compression, holding pressure test, holding pressure test;
3. Three measurement units: N-Kgf-Lbf is optional and can be automatically interchanged;
4. Touch screen LCD display with backlight, can be used in low light environment;
5. Single measurement, can read the peak value in both directions of pulling and pressing, and can be automatically and manually cleared;
6. With travel limit and overload stop function.
7. The floor-type door pull machine has a beautiful and exquisite structure, which is economical and practical;
fulfill the standard:
"GB / T16491-1996 Electronic Universal Testing Machine"
Widely used in wires and cables, hardware, electronics, packaging and printing, medical equipment, auto parts, textile leather, clothing and footwear, rubber and plastic products, colleges and universities; scientific research laboratories; commodity inspection arbitration, technical supervision departments and other industries, It is the basic equipment technical parameter of quality management and physical property test:
A. The maximum allowable load of the machine: 5T.
B. Load element: optional within 5T. (Made in the USA)
C. Load measurement accuracy: load element + display ± 0.5% (5% -100% of full scale)
D. Unit switching: Kg, Lb, N
E. Resolution: 1/50000
F, displacement resolution: 0.001mm
G. Power system: AC motor, reducer (made in Italy)
H. Control system: Test speed 50 ~ 350 mm / min stepless speed regulation (50, 100, 200, 300, 350) or customer specified.
I. Data sampling frequency: 200times / sec
J .. Link plate travel: 400, 500mm.
K. Safety device: overload, emergency stop device, up and down stroke limiting device, leakage protection device.
L. The machine itself is equipped with a print function.
M. Automatically calculate the average value, automatically capture the maximum value, and the force value at the time of breaking.
N. Display mode: LCD touch screen Chinese display, with the following functions:
①.Single test, breaking value; tensile, compression, holding pressure test, holding pressure test.
②. Automatic switching of multiple units such as kgf, Lbf, N;
③. Free point access function;
④. With multi-function correction function;
⑤. Automatic print function;
⑥. Adopt 24-bit AD acquisition, resolution 1/20000;
⑦. Decimal point number of 0 to 4 arbitrarily selected;
断. The breakpoint ratio is from 0 to 99%. Users can set the appropriate break down time according to different materials.
⑨. Overload protection function can be set to effectively prevent machine overload;
O. Power supply: AC 220V single phase.
P, power: 400W
Q, machine size:
75 × 70 × 220cm
R, weight: 450kg
1 set of tensile fixtures can be expanded:
The fixtures or specially designed fixtures and accessories can be selected according to the test standards or test samples provided by the customer, and the cost is extra.