Two-slot temperature shock test box, cold and hot shock tester GT-TC
Two-slot temperature shock test box, cold and hot shock box
Cold and hot shock testing machine, also known as environmental testing machine, tests the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. Suitable for electronics, electrical appliances, food, vehicles, metal, chemical, building materials and other factories.
* Control methods and features:
The hot and cold shock tester uses low and high temperature cold storage hot tanks, and quickly moves the gondola into the hot and cold tanks according to the action requirements, so as to achieve a fast temperature shock effect, balanced temperature control system (BTC) + specially designed air Circulating system, PID control SSR, so that the heating amount of the system is equal to the heat loss, so it can be used stably for a long time.
I. Model: GT-TC-64D Hot and Cold Impact Tester
Performance: It refers to air-cooled type at room temperature + 25 ℃, no-load.
1. Temperature range of test tank: -60 ℃-+ 100 ℃.
2.High temperature tank temperature setting range: + 40 ℃-+ 150 ℃.
3. High-temperature tank heating time RT (room temperature)-+ 150 ℃ takes about 40min (at room temperature between + 10-- + 30 ℃).
4. Low temperature tank temperature setting range: -60 ° C--10 ° C.
5. Low temperature tank cooling time RT (room temperature)--50 ℃ takes about 55min (room temperature is + 10-- + 30 ℃).
6.Temperature fluctuation: ± 1.0 ℃.
7.Temperature uniformity: ± 2.0 ℃.
8. Impact recovery time: －40-- ＋ 80 ℃ It takes about 5min.
※ High and low temperature impact constant temperature time is more than 30min each ※
Structure: 1.Internal dimensions: W40 × H40 × D40㎝.
2.External dimensions: W170 × H180 × D200㎝.
3.Inner box material: Mirror stainless steel plate (SUS # 304).
4. Outer box material: stainless steel plate with sand pattern (SUS # 304)
5. Thermal insulation material: a. High temperature tank: Aluminum silicate insulation cotton.
b. Low temperature tank: high density PU foam.
6.Box door: single door for upper and lower boxes, open to the left.
a. Embedded flat handle.
b.Back button: SUS # 304.
c. Silicone foam strip.
7. Sample rack: a. Hanging basket size: W350 x D350㎜.
b. The load capacity of the gondola is not more than 5KG.
c. 2 stainless steel SUS # 304 mesh hanging basket storage trays.
Fourth, heating system: fin-type cooling tube-shaped stainless steel electric heater.
1.High temperature tank 8 KW.
2.Low temperature tank 5 KW.
V. Supply air circulation system: 1. Motor 1HP × 2 sets.
2.Stainless steel extension shaft.
3. Multi-wing fan blade (SIROCCO FAN).
4.Specially designed fan forced air circulation system.
6. Refrigeration system: 1. Compressor: Fully enclosed high efficiency French Taikang