⎝⎛大家玩棋牌⎞⎠

您好! Collection site site map Hello! Welcome to the official website of Hubei Gaotian Testing Equipment Co., Ltd.!

National Service Hotline

189-8602-9251 027-83235843

Scan and consult

Popular keywords: Large-scale environmental test room constant temperature and humidity test box High and low temperature impact test box Three comprehensive test box

Product center
product center
Product Categories
    contact us
    Hubei Gaotian Testing Equipment Co., Ltd. Address: Building 5, Hechang Industrial Park, Jinghe Road, Dongxihu District, Wuhan City
    Phone: 027-83235843
    Fax: 027-83065209
    Q Q: 287777501
    Email: gaotianli@126.com
    4Products
    1-6K淋雨试验箱武汉工厂

    1-6K rain test chamber Wuhan factory

    Details
    1-6K rain test chamber

    1. Technical indicators
    The test room consists of a test bench, a water storage tank, a control box, a product dewatering buffer, and a spray system.
    Main equipment size:
    1. Total laboratory size: depth 3800 × width 1480 × height 1800㎜
    2. Inner box size: depth 1000 × width 1000㎜ × height 1000㎜
    Second, IP12 :
    The drip holes are 0.4mm, and the distance between each hole is 20 * 20mm. Drip area 800 * 800mm, height 100mm, a total of 1600 nozzles;
    (1) Rainfall: 1 + 0.5mm / Min, 3 + 0.5mm / Min and user-set parameters (using digitally controlled rainfall technology);
    (2) During the IPX2 test, the device automatically switches so that the four sides of the sample are exposed to rain for 150S each at an angle of 15 ° (automatic control);

    Physical picture


    IP34 rain shower  
    1. Swing tube: 400mm radius, other sizes can also be customized.
    2. Inner diameter of swing tube: ¢ 16mm
    3. Nozzle inner hole: 0.4mm
    4. Water spray hole distance: 50mm
    5. Swing tube material: 304 stainless steel industrial tube
    6. Nozzle angle: IP3: 120 °, IP4: 180 °
    7. Swing tube angle: IP3: 120 °, IP4: 360 ° (approximately)
    8. Water spray flow: R600 swing tube: 2.9L / m,
    9. Flow rate calculation: Nozzle hole number X0.07L / m = Swing pipe outlet water flow rate, spray water flow rate can be set
    10. Swing tube balance weight: The lower end of the swing tube is designed with a balance weight to ensure the swing of the swing tube.
    11. Flowmeter accuracy: 0.1L
    12. Turntable: φ500mm in total. Speed: 1-8 revolutions per minute Load: 20 kg (rotate in accordance with the program, a waterproof socket is installed in the box, and 5 turns to the left and 5 turns to the right to prevent winding during the electrical test) 304 stainless steel design and production

    IP34 rain shower  
    1. Swing tube: 400mm radius, other sizes can also be customized.
    2. Inner diameter of swing tube: ¢ 16mm
    3. Nozzle inner hole: 0.4mm
    4. Water spray hole distance: 50mm
    5. Swing tube material: 304 stainless steel industrial tube
    6. Nozzle angle: IP3: 120 °, IP4: 180 °
    7. Swing tube angle: IP3: 120 °, IP4: 360 ° (approximately)
    8. Water spray flow: R600 swing tube: 2.9L / m,
    9. Flow rate calculation: Nozzle hole number X0.07L / m = Swing pipe outlet water flow, can set water flow
    10. Swing tube balance weight: The lower end of the swing tube is designed with a balance weight to ensure the swing of the swing tube.
    11. Flowmeter accuracy: 0.1L
    12. Turntable: φ500mm in total. Speed: 1-8 revolutions per minute Load: 20 kg (rotate in accordance with the program, a waterproof socket is installed in the box, and 5 turns to the left and 5 turns to the right to prevent winding during the electrical test) 304 stainless steel design and production
    IP5 :
    1. A support frame of the IP5 nozzle is installed at the back, and a stainless steel cylinder is connected to the test chamber in the middle. The nozzle is 2700mm away from the center of the turntable.
    2. Pipe diameter: The side part is connected with 3 meters long by stainless steel pipe. Drum diameter: 600mm long and 2500mm long
    3. Nozzle hole size: φ6.3mm, (IP5 grade);
    4. Water spray pressure: 30 ~ 100kpa (adjustable)
    5. Water spray intensity: IP5-12.5 ± 2 (L / min)
    6. Turntable: φ500mm in total.
    7. Speed: 1-8 revolutions / minute
    8. Load-bearing: 20 kg (rotate according to the program setting, a waterproof socket is installed in the box, and 5 turns to the left and 5 turns to the right to prevent winding when the electrical test is performed)
    9. Water spray duration: 3, 10, 999min (adjustable)
    10. Running time control: 1 ~ 9999min (adjustable)
    11. Water circulation system to ensure water source recycling
    12. Water receiving surface: front of the product
    13, water spray pressure gauge, can display water spray pressure
    14. Control system: "Teelong" touch screen intelligent control system.
     
     
    IP6K rain test device
    1. Nozzle Aperture: 12.5mm
    2. Water spray flow: 100L / m ± 5L
    3. Water spray pressure: 8000-1000KPA (adjusted according to flow)
    4.Others Ibid.

    Security protection system :
    1. The safety protection system is the most important for users. Setting multi-layer protection is an important measure to protect users.
    2. Line sequence protection. The three-phase power is prone to lack of phase or the opposite line sequence can damage equipment or cause accidents to testers.
    3. Leakage protection, using unqualified heating wire or humidifying tube is enough to cause electric shock accident.
    4. Over-temperature protection. Using a controller with a poor quality brand may lead to temperature runaway and a fire accident.
    5. Abnormal protection. When a certain indicator of the equipment runs abnormally, the equipment automatically prompts the alarm cause and solution, and at the same time suspends the equipment operation and waits for the maintenance staff to solve the problem before running.

    Control System

    1.Using touch screen and PLC and Delta servo closed-loop control system
    2. Water pump flow control: use inverter to regulate speed
    3. Water spray flow: through the closed-loop feedback system of the flow meter, it can be set directly by the touch screen
    4. Touch screen: Weilun 7-inch true color
    5. PLC: Siemens
    6. Control functions: the vertical height of the drip tray, the angle of the swing tube, the water spray flow, the speed of the turntable, the test time setting, the drip tray automatically drains and blows dry.
    Protection device: loophole protection, water shortage protection, overload protection, safety distance protection
    7. Program setting: Program setting is convenient and reliable, 1-6K total test time

    Structural material :
    1. Nozzle: 30 304 stainless steel pipes
    2. Water tank and cabinet: 20 sheets of 304 stainless steel
    3. Electrical control accessories: pressure gauge, booster pump, flow meter, high pressure resistant hose
    4. Tempered glass on the door: thickness 6MM
    5. Stainless steel 304 square pass: 50 bars, 38 × 38mm
    6. Water spray method of IP56: spray water in order, choose IP5 or IP6
    7. IP34 water spray method: 40 0.4 spray holes spray water together, and do up and down swing at the same time,

    Environmental requirements
    1. Voltage: 380V, power: 25KW, 50HZ
    2. Temperature range: 10-40 degrees, humidity: 30-705HR%
    3. Water source: 1 inch water pipe to equipment accessories (distance about 1 meter)
    4. The distance between the equipment and other equipment or the wall: 1 meter behind the wall, 2 meters above the left (at the door), 1 meter on the right, and 1.5 meters in front.





    Parts List:
    Accessories name Brand Specifications
    touch screen Teelong 7 inch full color
    PLC controller Siemens 32 points, transistor output
    servo motor Delta 25 Nm
    Temperature Sensor Kerunmei -100 --- 200 degrees
    thermostat Delta 45X45MM
    Water pump Midnight Group 1500W
    Switching power supply Ming Wei 75W
    Nozzle (stainless steel) Teelong brand 12.5 0.4MMX2
    Electronic flowmeter Kunlun Industrial 6000L / hour
    Heating pipe By Teelong 1800W
    Float By Teelong
    Chassis shell \ Swing pipe, water tank Imported SUS304 stainless steel 1.2MM
    Bearing Japan NSK ID 25MM
    Bearing block Yulon Taiwan ID 25MM
    filter Formosa Plastic 5 inch
    Needle nozzle Stainless steel 304 0.4MM
    Sealing rubber Taiwan Rubber Xiangrui 4MM
    Electronic valve Taiwan Yu Puppet 4 points 80
    Pressure gauge Zhejiang 1mpa
    PVC pipe Liansu 2 inch, quarter
    304 stainless steel plate import 12000X24000X1mm20 sheets
    Tempered glass Domestic 500 mmX1000mm4 sheets
    Variable frequency motors and inverters Delta of Taiwan 2 400W
    Electronic flowmeter Kunlun Industrial 16L / M
    Float (stainless steel) Imported from Japan 2
    Case shell, inner box material Imported SUS304 stainless steel 2 MM
    Bearing (stainless steel) Japan NSK ID 25MM
    Bearing housing (stainless steel) Yulon Taiwan ID 25MM
    High pressure high temperature solenoid valve Italy MM Path: 1.5MM 150 BAR
    Shockproof pressure gauge Stainless steel 304 (panel type) 2 points
    High-temperature sealing rubber Imported from Italy 4MM
    Three-phase heterogeneous motor Walker, Italy 6KW
    high-pressure hose 304 stainless steel 3 points
    Inverter Delta 4KW



    七乐彩 im体育娱乐 手机电玩平台 欢乐拼三张