It is suitable for vibration test of toys, electronics, furniture, gifts, ceramics, communications, equipment, computers and automobile parts, etc., and is used to inspect its transportation resistance or uniform durability. Digital instrument displays vibration frequency; synchronous noise-reduction belt transmission ratio; guide rails are used for sample clamping, which is convenient and safe to operate; the base of the machine is made of heavy-duty channel steel with vibration-absorbing rubber pads, which is easy to install and runs smoothly without installing anchor screws ; DC motor speed regulation, stable operation and strong load capacity.
Horse racing shaker Hubei shaker simulation vibration test Purpose:
The purpose of the simulation transportation shake table is to make a series of controllable vibration simulations in the experiment, test whether the product can withstand the test of transportation or vibration environmental factors during the life cycle, and also determine the product design and function requirements. According to statistics, an increase of 3% in design level will increase recycling by 20% and reduce unnecessary expenses by 18%. There are different methods for vibration simulation based on different purposes, such as resonance recording, resonance dwelling, cyclic scanning, random vibration and stress screening. The effects of vibration include:
1.Strength of the structure.
2. Loosening of the conjugate.
3. Protect the material from abrasion.
4. Damage of components.
5. Poor contact of electronic components.
6. Short circuit and intermittent instability.
7. The standard value of each piece is offset.
8. Simulate the transportation shake table to detect the bad parts early.
9. Find the resonance relationship between parts, structure, packaging and transportation, and improve the resonance factors.
The vibration test procedure must evaluate the set test specifications, the authenticity of the fixture design, the functional inspection during the test, and the evaluation, review, and recommendations of the final test piece. The requirements of the simulated transport vibration test bench are to confirm the reliability of the product and to screen out the defective products in advance before leaving the factory, and to evaluate the failure analysis of the defective products in order to become a high-level and highly reliable product.
Technical parameters of Hubei shake table:
Product model: GT-MZ-100
Speed range (rev / min): 150-300RPM continuously adjustable
Precision RPM :: no more than ± 3 RPM
Amplitude: 1 inch (25.4mm) + 15%
Maximum load: 100kg can be customized
Worktable size: 1200 * 1000mm
Time setting range: 0-99.99 hours
Power supply voltage: 220V 50Hz
Weight: about 250kg
The above information is for reference only. If there is a non-standard customized machine, please call for information!